Polar FIS+ Advanced is a new plug and play interface for vehicles from VAG Group that shows some parameters and values in the MFD / FIS screen (Multi Function Display) located in your car dashboard.

The menus, messages, values and parameters are displayed in 14 languages: English, Spanish, German, French, Italian, Dutch, Portuguese, Danish, Romanian, Polish, Czech, Slovak, Slovenian, Chinese* and Russian* (* = only in cars with white and color FIS / MFD displays).

This is the new edition that has plastic black case and KESSY Range Extended for vehicles with keyless entry and engine start.

If your car have a FIS+ screen and appears on the below list of "compatible vehicles" you will be able to add those "extra" features to your car and activate secret functions without the need of diagnosis cables and/or special software.

Using a Windows computer and the USB-A <-> miniUSB-B cable included with the package you can update the device if there are future enhancements or new functions or just want to change the device software to make it compatible with another car model or brand!

Installing device is very easy and you not need to solder or make any complex operations. Just need connect / interleave it inbetween the Gateway and the CAN-BUS connector of your car and you are done. For your convenience the only required cable is supplied with the product.

The units of the values and parameters that you choose to display into the FIS / MFD screen can be shown in °C or °F for temperatures, in km/h or mp/h for speeds, in liters or UK gallons or US gallons for volumes, bars or millibars (mb) or PSI for pressures, Lambda / AFR for Lambda probe and Nm (Newton metre) or Ft-Lbs (Foot-pounds) for torque.



· Volkswagen Arteon
· Volkswagen Atlas
· Volkswagen Golf 7 (MK7)
· Volkswagen Golf 7 Sportsvan (MK7)
· Volkswagen Passat
· Volkswagen Tiguan
· Volkswagen Touran
· Volkswagen Teramont

· Skoda Octavia (MQB)
· Skoda Octavia RS (MQB)
· Skoda Karoq
· Skoda Kodiaq (MQB)

· Seat Arona
· Seat Ateca
· Seat Leon III (5F)



Locate the 2-character code that is between parenthesis in our list of compatible vehicles, for example 5F for the "SEAT Leon (5F)", and check the characters on the 7 and 8 positions of your vehicle's VIN (Vehicle Identification Number).

If you find the same 5F code in these positions then it is compatible: WAUZZZ5F77A021568

This same example is applicable for Seat, Audi, Volkswagen and Skoda which are the supported brands by the product.



001. Vehicle real speed - Select in the car: "Km/h"
002. External temperature - Select in the car: "Out. °C"
003. Engine RPMs - Select in the car: "RPM"
004. Battery voltage (Volts) - Select in the car: "Batt. V."
005. Current fill volume in the fuel tank - Select in the car: "Fuel Lit."
006. Calculated engine oil temperature - Select in the car: "!Oil °C"
007. Measured engine oil temperature - Select in the car: "Oil °C"
008. Ambient temperature in the engine compartment - Select in the car: "Amb. °C"
009. Intake air temperature - Select in the car: "Intake °C"
010. Engine coolant temperature - Select in the car: "Coolant °C"
011. Coolant temperature at the engine outlet - Select in the car: "Motor °C"
012. Coolant temperature at the radiator outlet - Select in the car: "Radiat. °C"
013. Fuel temperature - Select in the car: "Fuel °C"
014. Request boost presure - Select in the car: "!Boost mb"
015. Measured boost pressure - Select in the car: "Boost mb"
016. Atmospheric pressure - Select in the car: "Atm. mb"
017. Intake manifold absolute pressure - Select in the car: "Intake mb"
018. Required fuel pump pressure - Select in the car: "!Fuel bar"
019. Measured fuel pump pressure - Select in the car: "Fuel bar"
020. Common Rail fuel pressure - Select in the car: "F. rail bar"
021. Brake pedal pressure - Select in the car: "Brake bar"
022. Servo brake pump pressure - Select in the car: "Brake b. bar"
023. Calculated engine load - Select in the car: "!Load %"
024. Measured engine load - Select in the car: "Load %"
025. Mass air flow in bank 1 (MAF sensor) - Select in the car: "M.A.F. 1"
026. Mass air flow in bank 2 (MAF sensor) - Select in the car: "M.A.F. 2"
027. Throttle pedal position in sensor 1 (potentiometer 1) - Select in the car: "Pedal 1"
028. Throttle pedal position in sensor 2 (potentiometer 2) - Select in the car: "Pedal 2"
029. Throttle valve position in sensor 1 - Select in the car: "Valve 1"
030. Throttle valve position in sensor 2 - Select in the car: "Valve 2"
031. Delivered engine torque (Nm) - Select in the car: "Torq. nm"
032. Delivered engine power (HP) - Select in the car: "Power CV"
033. Level at which the oil is in millimeters above the alarm level - Select in the car: "Oil level"
034. Minimum level reached by oil in millimeters above the alarm level - Select in the car: "M. oil lev."
035. Injection timing synchronization - Select in the car: "Inj. tim."
036. Ignition angle - Select in the car: "A. °BTDC"
037. Sum of misfires accumulated on all cylinders - Select in the car: "Mis."
038. Number of misfires in the cylinder 1 - Select in the car: "Mis. 1"
039. Number of misfires in the cylinder 2 - Select in the car: "Mis. 2"
040. Number of misfires in the cylinder 3 - Select in the car: "Mis. 3"
041. Number of misfires in the cylinder 4 - Select in the car: "Mis. 4"
042. Number of misfires in the cylinder 5 - Select in the car: "Mis. 5"
043. Number of misfires in the cylinder 6 - Select in the car: "Mis. 6"
044. Number of misfires in the cylinder 7 - Select in the car: "Mis. 7"
045. Number of misfires in the cylinder 8 - Select in the car: "Mis. 8"
046. Number of misfires in the cylinder 9 - Select in the car: "Mis. 9"
047. Number of misfires in the cylinder 10 - Select in the car: "Mis. 10"
048. Number of misfires in the cylinder 11 - Select in the car: "Mis. 11"
049. Number of misfires in the cylinder 12 - Select in the car: "Mis. 12"
050. Number of misfires x1000 in the cylinder 1 - Select in the car: "Mis. x1"
051. Number of misfires x1000 in the cylinder 2 - Select in the car: "Mis. x2"
052. Number of misfires x1000 in the cylinder 3 - Select in the car: "Mis. x3"
053. Number of misfires x1000 in the cylinder 4 - Select in the car: "Mis. x4"
054. Number of misfires x1000 in the cylinder 5 - Select in the car: "Mis. x5"
055. Number of misfires x1000 in the cylinder 6 - Select in the car: "Mis. x6"
056. Number of misfires x1000 in the cylinder 7 - Select in the car: "Mis. x7"
057. Number of misfires x1000 in the cylinder 8 - Select in the car: "Mis. x8"
058. Number of misfires x1000 in the cylinder 9 - Select in the car: "Mis. x9"
059. Number of misfires x1000 in the cylinder 10 - Select in the car: "Mis. x10"
060. Number of misfires x1000 in the cylinder 11 - Select in the car: "Mis. x11"
061. Number of misfires x1000 in the cylinder 12 - Select in the car: "Mis. x12"
062. Angle delay in the cylinder 1 - Select in the car: "D. 1 °KW"
063. Angle delay in the cylinder 2 - Select in the car: "D. 2 °KW"
064. Angle delay in the cylinder 3 - Select in the car: "D. 3 °KW"
065. Angle delay in the cylinder 4 - Select in the car: "D. 4 °KW"
066. Angle delay in the cylinder 5 - Select in the car: "D. 5 °KW"
067. Angle delay in the cylinder 6 - Select in the car: "D. 6 °KW"
068. Angle delay in the cylinder 7 - Select in the car: "D. 7 °KW"
069. Angle delay in the cylinder 8 - Select in the car: "D. 8 °KW"
070. Angle delay in the cylinder 9 - Select in the car: "D. 9 °KW"
071. Angle delay in the cylinder 10 - Select in the car: "D. 10 °KW"
072. Angle delay in the cylinder 11 - Select in the car: "D. 11 °KW"
073. Angle delay in the cylinder 12 - Select in the car: "D. 12 °KW"
074. Exhaust gases temperature in bank 1 - Select in the car: "Exh. 1 °C"
075. Exhaust gases temperature in bank 2 - Select in the car: "Exh.2 °C"
076. Exhaust gases temperature at the catalyst inlet - Select in the car: "Catal. °C"
077. Air / Fuel ratio (Lambda factor) in bank 1 - Select in the car: "Lambda 1"
078. Air / Fuel ratio (Lambda factor) in bank 2 - Select in the car: "Lambda 2"
079. Fuel trim in bank 1/3 - Select in the car: "LTFT1-3"
080. Fuel trim in bank 2/4 - Select in the car: "LTFT2-4"
081. Specified duty cycle of the N75 valve - Select in the car: "!N75 %"
082. Measured duty cycle of the N75 valve - Select in the car: "N75 %"
083. Injection quantity - Select in the car: "Inj. m/str"
084. Injection start - Select in the car: "St. °BTDC"
085. Injection duration - Select in the car: "Dur. °KW"
086. Injection start quantity - Select in the car: "St. q. nm"
087. Injection quantity in the cylinder 1 - Select in the car: "D.1 m/str"
088. Injection quantity in the cylinder 2 - Select in the car: "D.2 m/str"
089. Injection quantity in the cylinder 3 - Select in the car: "D.3 m/str"
090. Injection quantity in the cylinder 4 - Select in the car: "D.4 m/str"
091. Injection quantity in the cylinder 5 - Select in the car: "D.5 m/str"
092. Injection quantity in the cylinder 6 - Select in the car: "D.6 m/str"
093. Injection quantity in the cylinder 7 - Select in the car: "D.7 m/str"
094. Injection quantity in the cylinder 8 - Select in the car: "D.8 m/str"
095. Injection quantity in the cylinder 9 - Select in the car: "D.9 m/str"
096. Injection quantity in the cylinder 10 - Select in the car: "D.10 m/str"
097. Injection quantity in the cylinder 11 - Select in the car: "D.11 m/str"
098. Injection quantity in the cylinder 12 - Select in the car: "D.12 m/str"
099. EGR valve duty cycle in bank 1 - Select in the car: "EGR1m/str"
100. EGR valve duty cycle in bank 2 - Select in the car: "EGR2m/str"
101. Requested charge pressure control - Select in the car: "!Control %"
102. Measured charge pressure control - Select in the car: "Control %"
103. Exhaust gases temperature before turbo - Select in the car: "EGT °C"
104. Diesel particles filter (DPF) temperature in bank 1 - Select in the car: "DPF1 °C"
105. Diesel particles filter (DPF) temperature in bank 2 - Select in the car: "DPF2 °C"
106. Diesel particles filter (DPF) oil ash volume in bank 1 - Select in the car: "DPF1 L."
107. Diesel particles filter (DPF) oil ash volume in bank 2 - Select in the car: "DPF2 L."
108. Diesel particles filter (DPF) percentage filling level - Select in the car: "DPF %"
109. Diesel particles filter (DPF) regenerations counter - Select in the car: "Regen."
110. Temperature at the Diesel particles filter (DPF) inlet - Select in the car: "DPF in °C"
111. Temperature at the Diesel particles filter (DPF) outlet - Select in the car: "DPF out °C"
112. Vehicle lateral G-force - Select in the car: "Side G"
113. Distance traveled since the last Diesel particles filter (DPF) regeneration - Select in the car: "DPF Km."
114. Ad-Blue tank percentage filling level - Select in the car: "AdB tank"
115. Ad-Blue grams used - Select in the car: "AdB used"
116. Requested pressure in the fuel Common Rail - Select in the car: "!F. rail bar"
117. Requested injection duration - Select in the car: "!Dur. °KW"
118. Requested injection start - Select in the car: "!St. °BTDC"
119. Calculated Lambda factor - Select in the car: "!Lambda"
120. Diesel particles filter (DPF) calculated filling level - Select in the car: "!DPF g."
121. Diesel particles filter (DPF) regeneration status - Select in the car: "DPF st."
122. Diesel particles filter (DPF) differential pressure - Select in the car: "DPF mb"
123. Measured soot mass 1 of the Diesel particles filter (DPF) - Select in the car: "Soot m 1 gr."
124. Measured soot mass 2 of the Diesel particles filter (DPF) - Select in the car: "Soot m 2 gr."
125. Calculated soot mass 1 of the Diesel particles filter (DPF) - Select in the car: "!Soot m 1 gr."
126. Calculated soot mass 2 of the Diesel particles filter (DPF) - Select in the car: "!Soot m 2 gr."
127. Lambda adaptation (%) while idle in bank 1 - Select in the car: "Lambda I 1"
128. Lambda adaptation (%) while idle in bank 2 - Select in the car: "Lambda I 2"
129. Lambda adaptation (%) while driving in bank 1 - Select in the car: "Lambda P 1"
130. Lambda adaptation (%) while driving in bank 2 - Select in the car: "Lambda P 2"
131. Exhaust gases temperature in sensor 1 - Select in the car: "EGT S1 °C"
132. Exhaust gases temperature in sensor 2 - Select in the car: "EGT S2 °C"
133. Exhaust gases temperature in sensor 3 - Select in the car: "EGT S3 °C"
134. Exhaust gases temperature in sensor 4 - Select in the car: "EGT S4 °C"
135. Requested Torque by the ASR - Select in the car: "!Torq. nm"
136. Torque reduction requested by the automatic DSG transmission - Select in the car: "DSG nm"
137. Indication of the actual torque limit - Select in the car: "T. red."
138. Diesel particles filter (DPF) requested regenerations - Select in the car: "Req. regen"
139. Electric generator load in % - Select in the car: "Gen. load"
140. Alternator power in watts - Select in the car: "Alt. power W"
141. Rear fuel pump pressure - Select in the car: "Fuel mb"
142. Rear fuel pump duty cycle - Select in the car: "Fuel DC"
143. Air conditioner (HVAC) compressor torque - Select in the car: "HVAC nm"
144. Air conditioner (HVAC) compressor pressure - Select in the car: "HVAC bar"
145. Vehicle longitudinal lateral G-force - Select in the car: "Long. G"



· Ability to setup the number of blinks of convenience signal lights* (up to 10 blinks).
· Automatic passenger mirror auto tilt option after engage reverse gear as a parking aid **.
· Activation of secret vehicle functions that until now only were possible with a diagnosis cable and special software.
· TV-Free in Motion function to play videos or TV in the navigation with the vehicle in motion for the enjoyment of passengers.
· Customizable steering wheel keys and windshield wiper lever.
· Modification of the sensitivity of the rain sensor.
· Modification of the sensitivity of the light sensor.
· Enable / Disable American DLR.
· Enabling / Disabling daytime running lights.
· Enabling / Disabling cornering/gyre aid lights (using fog lights).
· Enabling / Disabling second rear fog light (when bulb is installed).
· Enable / disable automatic doors lock from 15 km/h.
· Enable / disable automatic closing by rain.
· Enabling / Disabling one touch closing windows.
· Enable / Disable hazard warning in case of sudden braking.
· ...

NOTE: In these diagnosis functions, Polar Advanced FIS performs the tasks of coding the ECU with the requested function transparently for you, so if this function is not supported by your vehicle ECU, then it cannot be activated.

* = If you are unable to change the number of blinks from 3 to 4 or 5 or 10, although the configuration says its successful, when you try it and still blinks 3 times only. Then please try to change number of blinks again, and then exit to MFD configuration menu and go to SETTINGS -> LIGHTS & VISION and select FACTORY SETTINGS. In some cars, this step must be performed manually due to the car BCM unit.

** = If you see the mirror auto tilt option becomes inaccurate after few cycles and you notice the driving mirror position you configure gets messed up and remains much lower after few parking cycles, no panic because this is normal since your car has no factory fitted "OEM seats and mirrors memory pack" and therefore there is no hardware encoder to indicate the mirror position. So Polar FIS use time base to positioning the mirror. Unfortunately this is not the best mode for positioning, so this means that in some vehicles after an up and down mirror cycle it does not return to its original position. So if you note that after some up and down mirror cycles mirror goes more and more lower, you must setup a positive offset value into SETTINGS -> COMFORT -> MIRRORS -> OFFSET. If you note that the mirror goes more and more higher, the offset value must be negative.



· Its compatible with OEM and FISCON free-hands kits.
· In red FIS the menu name is customizable and you can change it to any text you desire (up to 10 characters).
· Option to switch-off the POLAR FIS Advanced in order to make it fully indetectable when you go to service center.
· It can be reactivated just by pressing and holding the OK key in the steering wheel (or windshield wipers lever) during 10 seconds.
· Automatic recognition of measurement units: temperature (ºC or ºF), speed (km/h or mph), capacity (litters or gallons US or gallons UK), ...



After install Polar FIS you will notice after entering into the "Telephone" menu of your FIS screen that the Polar FIS main screen will appear. Just in case that your vehicle does not have OEM Bluetooth hands free unit, this menu will be created. Due to the instruments cluster limitations, it is not possible to create a new menu entry like in Polar FIS for Red dot FIS vehicles, so in White/Colour FIS vehicles, Polar FIS will share the "Telephone" menu with the hands free OEM Bluetooth hands free unit if installed.

If you want to access to the OEM Bluetooth hands free unit menu, staying at the "Telephone" menu while displaying Polar FIS, press and hold the OK button of the multifunction steering wheel or wiper stalk until the main menu screen appears. Then scroll with Up or Down buttons, select the Bluetooth option and press OK to get the OEM Bluetooth Hands free menu. To return to Polar FIS menu, exit as normal from OEM hands free menu, and you will go back to the Polar FIS screen.

Similarly, if you make or receive a call, the original screen of the OEM Bluetooth hands free menu will be automatically displayed as was happening before installing your Polar FIS.



The keys can be configured for do some functions when we are inside Polar FIS menu:

· Modify volume.
· Change audio track.
· Change the parameters or values displayed in the bottom line of the Polar FIS screen.

Also you can modify the keys for functions of the built-in AUDIO menu:

· Modify volume.
· Change audio track.

This useful for cars in which the multifunction steering wheel is not installed at the factory and these keys do not work.

IMPORTANT: In cars without multifunction steering wheel equipped with, the option of change audio track is not available. The functions of the steering wheel buttons are not available in all cars, because it always depends on the original factory setup of your vehicle.



1 x Polar FIS+ Advanced (always updated to the latest version and tested before shipment).
1 x CAN-BUS <-> Gateway connection cable.
1 x Manuals in PDF: quick start guide, installation manuals and instructions.
1 x Videos with examples of installation and use.

· Disc entirely developed by our technical department, you will not find in other stores!!
· We supply ALL software, drivers and updates needed for the use and installation of the product.
· Manuals in PDF format also 100% in Spanish including real screenshots with all steps for the installation.
· Videos in Executable format ready for Windows with real processes of use, unlocking, etc...









Generally, the devices connected to a computer, as boxes and dongles, and its licenses, calculators, activations and software, may need permanent and stable internet connection during the usage of processes and functions available on each device.

This is because the protection mechanisms and algorithms are residing on internet servers owned by the device manufacturer and software developer. These mechanisms are necessary to carry out these above mentioned processes and functions.

Our company strives to select products, for our online sales catalog, that are renowned worldwide, with frequent and regular udates, and in many cases, free and at no charge. However, our company is not responsible for the decisions of each particular manufacturer or developer, including without prior advice, such as, the possibility of a not continuity of updates of any of the products, changes in the policy of renewal of licenses, calculators, activations, credits, logs, server status at anytime (online / offline), as well as future functions, upgrades to new versions, etc ... since these aspects are only depending on the manufacturers of mentioned devices and not in our company.